Elegant Design Pulsating Shower Massage Shower Panel FONTANA B3009

Shower Panel Installation Instructions Elegant Design Pulsating Shower Massage Shower Panel FONTANA B3009

Before installing,Shower Panel Installation Instructions. Observe all local building and safety codes. Unpack and inspect the product for any shipping damages. If you find damages, do not install. Contact Customer Service .The appropriate mounting hardware can be purchased from your local hardware store. We recommend consulting a professional if you are unfamiliar with installing outdoor and plumbing fixtures.

 

TOOLS AND MATERIALS: Drill Mounting Hardware Level Adjustable Wrench

 

Elegant Design Pulsating Shower Massage Shower Panel FONTANA B3009

Elegant Design Pulsating Shower Massage Shower Panel FONTANA B3009

 

Elegant Design Pulsating Shower Massage Shower Panel FONTANA B3009

Elegant Design Pulsating Shower Massage Shower Panel FONTANA B3009

Elegant Design Pulsating Shower Massage Shower Panel FONTANA B3009

Elegant Design Pulsating Shower Massage Shower Panel FONTANA B3009

INSTALLATION

1. Holding the panel in place, determine your installation location and mark the position of the mounting holes for drilling.

2. Drill screw holes with the appropriate drill bit for the wall surface or material.

3. Attach the mounting bracket to the wall with the mounting hardware.

4. Attach the hand shower hose to the outlet on the side of the shower panel. Do this gradually, alternating from one nut to the other until both are tight.

5. If a separate shower arm is included, insert the new arm into the fitting in the panel and twist to tighten. Finish tightening with an adjustable wrench. Wrap a dry cloth around the shower arm to protect the finish while tightening. Thread the new shower head onto the arm and hand-tighten.

6. Attach the included ON/OFF valve to the flexible water feed tube and attach the valve to the main water supply.

7. Turn on the water supply to make sure there are no leaks in the water feed tube(s). If no leaks are detected, continue with installation. If leakage does occur, use your adjustable wrench to tighten the connections as necessary

8.Attach the shower panel to the wall by hanging from the mounting bracket. Check to make sure it is hung firmly and level, adjust as necessary.

9. When the shower panel is in place, turn on the water, check to make sure that all connections are tight (no water should be leaking) and that the water supplies are working correctly. Divert the water to the each output and allow the water to flow for approximately 60 seconds

Elegant Design Pulsating Shower Massage Shower Panel FONTANA B3009

 

Leave a Reply

Your email address will not be published. Required fields are marked *