INSTALLATION INSTRUCTIONS
The Bravat Chrome Finish Dual Handle Bathroom Sink Touchless Faucet offers a unique and innovative approach to bathroom functionality. What sets it apart is its touchless operation, allowing for a hands-free experience. With advanced sensor technology, the faucet detects the presence of your hand and automatically activates the water flow, promoting hygiene and convenience. The sleek chrome finish adds a modern and sophisticated touch to any bathroom design. The dual handle design provides precise control over water temperature and flow, ensuring a personalized and comfortable experience. Additionally, the solid brass construction guarantees durability and longevity, while the chrome finish resists corrosion and tarnishing, maintaining the faucet’s beauty over time. With its combination of touchless technology, sleek design, and high-quality materials, the Bravat Chrome Finish Dual Handle Bathroom Sink Touchless Faucet offers a unique blend of convenience, style, and durability, making it an exceptional choice for any modern bathroom.
- Before you begin, read the installation instructions below. Observe all local building and safety codes.
- Unpack and inspect the product for any shipping damages. If you find damages, do not install it.If you need assistance or have questions while installing your shower set, contact Customer Service.
- We recommend consulting a professional if you are unfamiliar with installing bathroom fixtures, and plumbing.
TOOLS AND MATERIALS:
- Screwdriver
- Teflon Tape
INSTALLATION
1. If your faucet comes with the brass T attached to the faucet body, unthread and remove the T and associated
hardware.
2. Thread the silver mounting washer and rubber sealing gasket on the faucet body.
3. Apply a bead of silicone sealant to the underside of the spout, or faucet base, and thread through the center
mounting hole.
4. Thread the mounting hardware and brass T onto the spout pipe and hand-tighten to secure.
5. Check to make sure the faucet is properly aligned and adjust as needed. When the faucet is in the proper position,
finish tightening mounting hardware with your adjustable wrench.
Tip: Make sure that the T outlets are aligned at an angle to allow maximum clearance for water connections.
6. Wipe away any excess sealant around the faucet base using your damp cloth.
7. Assemble the handles by screwing the lock nuts down to the end of the handle bodies. If handles are assembled
move on to step 8.
8. Insert the handle bodies up through the mounting holes. Thread the plastic slip washers and rubber sealing gaskets
onto the handle bodies to secure.
9. Hand tighten to attach the hot and cold flexible water feed tubes to the handle bodies and brass T. Give a ¼ turn with
pliers or wrench, but don’t overtighten. (Hot water is always on the left and cold water is always on the right.) Curve
tubes as necessary to ensure there are no kinks or knots.
10. Place the handle assemblies on the handle bodies. Make sure that both handles are in the OFF position and tighten
the set screw on the top or side of the handle with Allen wrench (provided).
11. Connect the main water supply to the faucet body.
12. To install the new pop-up drain, apply a bead of silicone sealant to the underside of the drain flange and place it in the mounting hole. If there is no pop-up drain, move on to step 16.
13. Thread the lock nut onto the drain pipe and tighten with your adjustable wrench.
14. Wipe away any excess sealant around the drain using your damp cloth.
15. Push the pop-up rod down through the faucet body. Attach the pop-up rod to the pivot rod with the extension rod.
Adjust the rods so that the drain stopper opens and closes properly.
16. Attach the P trap to the drain pipe and wall drain fitting and tighten the locknuts.
17. When your faucet installation is complete, turn on the water supply. Check to make sure that all connections are tight
(no water should be leaking) and that the hot and cold supplies are working correctly. Turn the water on and allow
the water to flow through the spout for approximately 60 seconds.
