Installation Instructions The Brio Chrome Finish Dual Automatic Sensor Faucet and Soap Dispenser offers a unique and convenient solution for enhancing hygiene and efficiency in commercial settings. This innovative combination seamlessly integrates a touchless faucet and a soap dispenser into a single unit, providing a streamlined and hygienic handwashing experience. The automatic sensor technology ensures a hands-free operation, minimizing the risk of cross-contamination and promoting […]
Installation Instructions
Installation Instructions Before installing, read entire Installation Instructions. Observe all local building and safety codes. For the following installation instructions for your new product, it is assumed that any old fixtures have been removed and any repairs or modifications to the water supply have been completed. Unpack and inspect the product for any shipping damages. If you find damages, do not install it. Contact Customer […]
INSTALLATION INSTRUCTIONS Before you begin, read the installation instructions below. Observe all local building and safety codes. Unpack and inspect for any shipping damages. If you find any damages, do not install. Contact Customer Service. If you need assistance while installing your shower system, call our Customer Service number. We recommend consulting a professional if you are unfamiliar with installing bathroom fixtures and plumbing. TOOLS […]
INSTALLATION INSTRUCTIONS Basic-size, according to the embedded box to open the hole on solid wall, should consider installing the metope of the distance between 60-75mm, for example, after blank wall in the shop, the ceramic tile surface to increase the thickness of the 20 mm, so PiQiang in the depth of the hole should be chosen 40 to 55 mm. Hole bottom should remain […]
Installation Instructions No tools required, ½ connector fits standard sized shower plumbing. Use your hands counter clockwise to unscrew the old showerhead and removed it. Take out the showerhead, make sure the shower filter is placed in the connector. Ensure the showerhead full horizontal alignment wall mounted shower arm thread. Use your hands clockwise to tighten showerhead. 1. Install the valve body. […]
Installation Instructions Hand-Held Shower To install the hand shower’s slide bar, first, remove the water supply elbow from the slide bar by loosening the set screw underneath. Remove the brass nipple from the elbow by unthreading it. Thread the brass nipple into its prepared female fitting. Apply plumber’s tape or thread sealant to the threads before attaching. Tighten firmly using an adjustable wrench. Install the […]
Installation Instructions No tools required, ½ connector fits standard-sized shower plumbing. Use your hands counterclockwise to unscrew the old showerhead and removed it. Take out the showerhead, make sure the shower filter is placed in the connector. Ensure the showerhead full horizontal alignment wall mounted shower arm thread. Use your hands clockwise to tighten showerhead. (a) Tighten Connector (26) […]
Installation Instructions In order to install this shower panel, a simple understanding of plumbing techniques will be necessary. Please contact a professional plumber if you are unfamiliar with plumbing techniques or require assistance. Separate cold and hot water supply lines. This shower panel replaces any mixing valve you are currently using. Remove the shower panel and locate the position of the mounting brackets. Take measurements […]
INSTALLATION INSTRUCTIONS Pull handle outward and turn to blue sides to regulate cold water, In contrast to red to regulate hot water. (a) Cover the Escutcheon (23) onto the connector of water supplies and against the wall. (b) Tighten Wall Tube (24) to the connector of water supplies after winding Teflon Tape on it. Note: Don’t over tighten to avoid damage. Tighten the Shower […]