INSTALLATION INSTRUCTIONS
- Before you begin, read the installation instructions below. Observe all local building and safety codes.
- Unpack and inspect the product for any shipping damages. If you find damages, do not install.If you need assistance or have questions while installing your shower set, contact Customer Service.
- We recommend consulting a professional if you are unfamiliar with installing bathroom fixtures, and plumbing.
TOOLS AND MATERIALS:
- Screwdriver
- Teflon Tape
These instructions are meant as a general guideline. Always check the package for instructions for your particular product.
- Remove your existing shower head
- Clean the shower arm supply pipe threads
- If a gasket is not included, wrap the shower arm supply pipe threads with Teflon Tape
- Screw new shower head onto the shower arm supply pipe threads clockwise and hand tighten
Cleaning the outer coating: dirt or stains on the external surfaces of the product resulting from scale deposits should be removed by washing the product with soapy water only.
Scale deposits should be dissolved with vinegar then the surface rinsed with clean water and rubbed dry with a soft cloth; under no circumstances should the surface of the product be cleaned with coarse cloths or cleaning agents containing abrasive materials or acids; plastic or lacquered parts must not be cleaned with chemicals containing alcohol, disinfectants or solvents.
