INSTALLATION INSTRUCTIONS
Hand-Held Shower
- (a) Tighten Connector (26) with Teflon Tape to Water Supplies.
Note: Don’t over tighten to avoid damage.
(b) Place Hand Shower Holder (38) onto Connector and fix it with Set Screws (31).
(c) According to the holes of Hand Shower Holder confirm the location of the mounting hole on the wall, Knock into the Anchor (27) and fix the Hand Shower Holder with Screw (37).
- Tighten one side of Shower Hose (36) onto Hand Shower (39), and another onto Joint.
Note: Don’t over tighten to avoid damage.
- When installation is complete, check all connections for leaks.